Winvall Three Way Motorized Valve DN15 3-Way Stainless Steel Electric Ball Vlave

• Customization: Available
• Media: Water
• Material: Stainless Steel
• Model NO.: WRA-6302A+WSBV315
• Connection Form: Thread
• Driving Mode: Electric
• Nominal Pressure: PN1.0-32.0MPa
• Channel: Tee Type
• Structure: Fixed Ball Valve
• Type: Fixed Ball Valve
• Function: Relief Valve
• Temperature: Normal Temperature
• Standard: ISO9001
• Application: Industrial Usage, Water Industrial Usage, Household Usage
• Temperature of Medium: 2ºC...90ºC
• Medium: Cold/Hot Water, with 50% Glycol
• Rated Pressure: Pn20
• Transport Package: Carton with Pallet
• Specification: DN15
• Trademark: Winvall
• Origin: China

Product Description

Description
Winner motorized ball valve consists of 3-point type actuator and WSBV… series SS304 ball valve,which have compact structure,stable operation,excellent capacity of water stoppage, large water flow rate, zero dirt block and low torque. 

Application
Winner mini motorized ball valves are widely used in HVAC system, heating system, water treatment system and some industrial equipments. 


 
Technical data:
Valve body
Medium: cold/hot water, with 50% glycol                                      Temperature of medium: 2...90 Centigrade
Rated pressure: PN20                                                                  Pipe connector: internal thread                              
Ambient temp. range: -5...+60 Centigrade ;0...90%RH                

Material 
Valve body: Stainless Steel SS304                                             Seal: ball:EPDM+PTFE, with double O-ring
Ball: Stainless Steel SS304                                                         Stem: EPDM O-rings, with double O-ring
 

Model No.	Type	Dia.	Inch	Pmax(KPa)	Ps(KPa)
WSBV315	3-way	15mm	1/2"	1000	1400

Actuator

Model No.	Working Voltage	Actuator type	Output torque	Consumption	On/off time	Valve body
WRA-6302A	24VAC±15%     50/60Hz	on/off	>3.5N.m	7W	50Hz:15S     60Hz:12S	WSBV315   WSBV320   WSBV325

Installation
Insert the valve stem to the bottom of the actuator, and insert 2 pin, located in the bottom of the actuator to the valve's mounting hole. Then screw down the brass cap nut